GET STARTED
GET STARTED
The C67 standard is a critical one in the construction sector by ensuring consistent testing procedures for bricks and structural clay tiles. It is an international standard and a guide for engineers, manufacturers, and quality assurance specialists to ensure that the masonry materials satisfy stated requirements. The tests cover testing for compressive strength, absorption, efflorescence, freezing and thawing resistance, and other key characteristics. Compliance with these procedures ensures that bricks and tiles are capable of withstanding environmental and load stresses experienced in actual applications.
| Compressive Strength Test | Determines the load-carrying capacity of the brick or tile under pressure. |
| Water Absorption Test | Measures the amount of water absorbed, indicating porosity and durability. |
| Efflorescence Test | Detects the presence of soluble salts that can migrate and cause surface stains. |
| Compression Testing Machine | Bricks should be clean, free of moisture, and tested in a dry state. |
| Water Bath and Balance | Samples must be submerged for 24 hours for absorption tests. |
| Controlled Environment Chamber | Samples for freeze-thaw cycles should be saturated and conditioned appropriately. |
The results of the compressive strength test are compared with given standards in order to determine if the bricks or tiles are capable of bearing anticipated loads without collapse. The water absorption results reflect the porosity of the material; values that are lower are desirable as they indicate higher durability. The result of the efflorescence test is typically graded as none, slight, moderate, or heavy, reflecting the extent of salt deposits on surfaces. A material that exhibits too much efflorescence is considered unsuitable for exposed masonry construction. Ongoing compliance with these findings aids in ensuring material reliability and structural integrity.
| Service Name | Remarks |
|---|---|
| ASTM C67 Testing | Contact US |
A number of associated ASTM standards supplement ASTM C67, such as ASTM C62 for building bricks and ASTM C216 for facing bricks. These standards provide comprehensive specifications for brick types, grades, and applications. In addition, ASTM C73 and ASTM C652 give specifications for hollow structural clay tiles and hollow bricks, respectively.
C67 testing methods are crucial in the manufacturing and construction sectors, ensuring production batches meet quality control parameters. They are used by architects, engineers, municipalities, and regulatory bodies to verify compliance with safety codes and building regulations, fostering trust in the durability and reliability of clay-based construction materials.